DIY: Valentine V1 hardwire install
Tuesday, May 20th, 2008 Posted in Jetta/GLI, Rabbit/GTI | 3 Comments »These instructions can be used to hardwire just about any aftermarket electronic device so that it will power on with the ignition. The only difference is where you mount the device, and how you run the wire. Tools required: Trim tool -or- ...
DIY: modifying service interval settings (with VAG-COM)
Sunday, May 18th, 2008 Posted in 2.0T FSI, 2.5L, Jetta/GLI, Rabbit/GTI | No Comments »To perform the mileage adaptation: 1.) Select 17-Instruments 2.) Select Adaptation (10) under advanced functions 3.) Enter Adaptation Channel Number: 42 and select "Read" 4.) The window should read: "Minimum value mileage" and Min. Value Oil in 100 Miles 5.) The stored value should read ...
DIY: resetting service indicator (with or without VAG-COM)
Sunday, May 18th, 2008 Posted in 2.0T FSI, 2.5L, Jetta/GLI, Rabbit/GTI | No Comments »For people without access to VAG-COM: Vehicles with Multifunction Display - 1.) With the key out of the ignition - Press and hold the “0.0”, located on the right side of the instrument cluster. 2.) While holding the reset button insert the key ...
